This low power digitaliser Seismic Recorder resolution 6+1 analog seismic channels telemetry digitiser/recorder. 32bits ADC converters provide effective resolution better than 23.7bits@100sps. The size of the instrument is only 168x106x68mm.

The GEOThree recorder has 3 input channels, and integrated sensor electronics. The digitizer is based on a powerful, wide dynamic range 32bit delta-sigma analog-to-digital converter, with very low noise characteristics and excellent power supply rejection.

The technique is based on advanced triggering and decision algorithms, running at the machine and at server’s side, respectively.

The S-400 is a three-component velocity equivalent output seismic sensor.

The S-200 is a three-component velocity equivalent output seismic sensor.

This is a compact, ultra low-cost digital accelerograph. It integrates 3 axes MEMS accelerometer, 20bit digitizer, embedded linux OS and GPS or NTP timing.

This is a compact miniature digital seismometer which integrates three seismic and three acceleration channels. It supports high resolution 24bit digitizer, embedded linux OS and GPS or NTP timing.

The GEOthree series high resolution 3+1 analog seismic channels telemetry digitizer / recorder.

The GB6211 seismometers combine the low-noise molecular-electronic sensing element (transducer) and the electrodynamic feedback which results in a very flat response over a wide frequency range, high dynamic range and greatly improved time and temperature stability of the instrument parameters.

The S-100 is a three-component velocity equivalent output seismic sensor.

The acceleration output of SM1500 and SM550 sensors can be analog bipolar or differential, 4-20mA current loop output is also available for both sensors.

The GB6211 seismometers combine the low-noise molecular-electronic sensing element (transducer) and the electrodynamic feedback.

The C-100 is a three-component velocity equivalent output seismic sensor.

Model 16SG12-N-12 Channel

The combined system seismograph plus electrical imaging is not only characterised by its innovative design and its completely renewed acquisition software.

Model 16SG24-N-24 Channel

The combined system seismograph plus electrical imaging is not only characterised by its innovative design and its completely renewed acquisition software.

Model Polares 16SG24-N

This model is 32 Electrodes.

Available in 32 Electrodes, 48 Electrodes, 64 Electrodes -Seismic Recorder

Model 16S12-P-12 Channels

The seismographs for “active seismic” survey.

Model GEA24

The seismic recorder is a compact size with 24 channels (10 Hz geophones @ 5m spacing) with a 24 bit.