Access to high performances with the Digital Handheld Instrumentation.

A real combination of simplicity, flexible, reliability and reduced maintenance technologies, the ODEON Meters offer you a total confidence in your readings in laboratory and field conditions.

The ammonia nitrogen sensor using RS485 communication interface and Modbus RTU standard protocol. It has built-in PT1000 temperature sensor and compensation algorithm. It can replace the ammonia nitrogen intelligent sensor with film head without reagent, secondary pollution and low maintenance cost.

The Ammonia Nitrogen Sensor detects a low concentration of ammonia nitrogen in water by measuring the change in absorbance at a given point in time.

It can be used in harsh environment and the monitoring data is stable and reliable.

The auto cleaning – anti fouling system is a mechanical wiper system designed to fit easily to the numerical sensor of Turbidity NTU.

The early warning bacteria system, for the detection of microbiological activity.

The measurements are realised in a short period of time, 1-2 hours, depending on the sampling volume and cleaning procedures.

The Blue Green Algae Sensors is an intelligent sensor with cleaning brush for chlorophyll/cyanobacteria sensor based on RS485 communication interface and Modbus RTU standard protocol.

It can measure cyanogreen algae, rhodamine and other factors.

Chemical Oxygen Demand (COD) is the total measurement of all chemicals (organics & in-organics) in the water and waste water.

The COD Sensor can be used to detect the Chemical Oxygen Demand value of water quality. It can be used in harsh environment and the monitoring data is stable and reliable.

The dissolved oxygen sensor for monitoring water quality. It can be used for on-line monitoring and for harsh environment in the field.

Chloride is found in both saltwater and freshwater. Almost all natural waters contain chloride.

This chloride sensors measures the levels in water ensuring it is safe for all animals, plants and humanity.

Clamp on Electric Flow Meter

Model C4E

The conductivity sensor has 4 electrodes (2 graphic, 2 platinum), Range 0 to 200 mS/cm,  Digital sensor / Modbus RS-485, Robust and Watertight, comes with 15 metre cable.

The pH sensor consists of a measuring electrode, a reference electrode (Ag/AgCl), a Gel electrolyte (KCl), a temperature electrode, a smart signal processing module (SSP) and a housing.

Buoys suitable for housing data monitoring equipment can be fitted with access hatches, internal tubes, tying off cleats and battery housings.

The fishing camera is designed with one 30m underwater camera and 5-inch LCD DVR monitor set.

The digital pH sensor with redox and temperature -measures: pH, redox, temperature

The Digital Sensors DIGISENS (smart water control sensors) sensors can connect to any type of recorder, transmitter or controller with a Modbus RS485 input, making data transfer more reliable.

The DIGISENS sensors can connect to any type of recorder, transmitter or controller with a Modbus RS485
input, making data transfer more reliable.

The fixed Digital Transmitter Multiparameters Instrument – Intelligent transmitter for intelligent sensors: Dissolved oxygen / Turbidity / pH / T°C / ORP / Conductivity / Salinity / COD, TOC, BOD, SAC254.

Waste water treatment plant (aeration tank for control/regulation of Nitrification / Denitrification process, Drinking water (control raw water), Industrial waste water treatment (reject control, regulation), Survey of surface water, Fish farming and wine testing.

The dissolved oxygen sensor for monitoring water quality. It can be used for on-line monitoring and for harsh environment in the field.

Dissolved oxygen is a measure of water quality.  It can be used in industrial water treatment plants, aquaculture, fish transportation, aquariums etc.

The dissolved oxygen sensor for monitoring water quality. It can be used for on-line monitoring and for harsh environment in the field.

This drinking water measurement of turbidity measures and controls cooling water treatments and drinking water.

A voltage is induced in a conductor moving through a magnetic field.

In the electromagnetic measuring principle, the following medium is the moving conductor.

The thermocouple (resistance) integrated temperature transmitter, a thermal resistance and a temperature transmitter module.

The E-series is more than fulfilling the rules for explosion proof design, it is about safety during the daily operation.

F series is an extensive selection of indicators, controllers and monitoring systems for liquid and gas applications as well as for level ,pressure and temperature measurement in industrial environments.

N410 Batch Controller.

The fluorescent dissolved oxygen sensor is designed for the continuous measurement of dissolved oxygen in water.

The fluoride sensor easily measures the extent of fluoride mainly in water.  It is used in Agriculture, Councils and government bodies testing drinking water to ensure the water is safe.

The operation of the International Gas Turbine Meter is based on the measurement of the velocity of gas. The flowing gas is accelerated and conditioned by the meters straightening section.

High quality Handheld Ultrasonic Flow Meter with Clamp On Ultrasonic Flow meter incorporates the latest ICs manufactured from the famous semiconductor.

Model CTZ-S10

The inductive conductivity sensor based on electromagnetic induction.

Intelligent Swirl flow meter developed by our company is a new flow instrument at the leading level in China. This instrument has a combined function of flow capacity, temp and pressure measuring.

The isotherm portable sampler is used to store collected samples at controlled temperatures. 

Fluid entering the meter first passes through an inlet flow straightener that reduces its turbulent flow pattern. Fluid then passes through the turbine, causing the turbine to rotate at a speed proportional to fluid velocity.

A portable five-in-one sensor. It can monitor PH, dissolved oxygen, conductivity, turbidity and temperature at the same time. It can also select extra COD, chlorophyll and cyanobacteria items.

The multi-parameter water quality meter is a portable five-in-one sensor. It can monitor pH, dissolved
oxygen, conductivity, turbidity and temperature at the same time. It can also select extra COD, chlorophyll and
cyanobacteria items.

Model OPTOD

The optical dissolved oxygen sensor uses luminescence to determine dissolved oxygen levels and output data in a digital format. Comes with 15 metre cable bare ended.

The optical dissolved oxygen sensor does not require calibration it features ultra-low power technology.

The overflow detector sensor detects the presence of water and delivers information in the form of non-polarised dry contact.

The Oxidation Reduction Potential ORP Electrode Sensor measures the ability of a lake/river etc to cleanse itself as it breaks down waste products, these include contaminants as such dead plants and animals.

The pH Electrode Sensor that can be used to detect the pH value of water quality. It can be used in harsh environment surface and ground water.

The pH Electrode Sensor can be used to detect the pH value of water quality. It can be used in harsh environment and the monitoring data is stable and reliable.

The pH redox sensor is being used in professional working field and laboratories, 15 metre cable.

Model ODEON-PHOTOPOD

The portable digital numerical photometre is dedicated to water quality control.

The extended selection of process fittings and materials allows use in extreme temperature and pressure ranges.

Residual chlorine is the extent of chlorine that remains in the water at a certain point of time. Its main use if by water treatment plants.

The Spectral Absorption Coefficient (SAC) at 254 nm helps determine the organic content of a water sample
also the COD, TOC and BOD parameters by applying the appropriate correlation coefficients.

The Submersible Borehole Level Sensor is designed for ground water and drilling fluid level measurements. Based on the fluids design, it can ensure the stability of the measurement.

The Submersible Ceramic Level Sensor is a liquid level measuring instrument with high stability and precision. It adopts fully sealed 316SS stainless steel body and ceramic core body, high explosion-proof and easy to clean.

The Submersible Digital Level Sensor is designed with tapered and fully sealed IP68 waterproof design, so it is suitable for all kinds of harsh environment measurement.

The Submersible Water Level Sensor is suitable for any water level measurement. It adopts 316SS all-welded stainless steel body design, which can resist the impact and erosion of any medium.

Model APW-MES

The  suspended solids metre use the principle of optical absorption of IR light and delivers a direct indication in g/l of the concentration of particles in suspension in all types of sludges up to 50 g/l.

The new numerical tripod allows you to measure until 8 physico-chemical parameters in the same time dedicated to the quality of waters.

The S200 Digital Turbidity transmitter.

Turbidity sensors measure the extent of light throughout suspended solids in water. The extent of the light in water increases the waters turbidity levels.

The turbidity sensor Nephelometric is used for drinking and very pure waters.

The TS7 Sensor consists of a light source and a light detector (photo detector).

This is a compact, easy-to-use system for measuring the velocity and depth of water in rivers and streams, open drainage channels, and large pipes.

Ultrasonic Flow Meter – Hand held, Portable and Wall Mounted

This instrument determines the height from the bottom to the surface of the liquid by measuring the air propagation time.

The Variable Area Flow meter is an instrument for measuring the flow of liquids or gases in pipelines. It includes a vertical tube through which the fluid flows whose diameter increases from the bottom to the top and a float which can move vertically in the tube.

The vortex flow meter is used for measuring the flow velocity of gases or liquids in pipelines flowing full.

The measuring principle is based on the development of a Karman vortex shedding street in the wake of a body built into the pipeline.

 PHEHT digital pH, ORP and temperature Sensor Bare Wire

NTU Turbidity Sensor Bare wire

OPTOD digital Optical Dissolved Oxygen Sensor Bare Wire

Conductivity and Salinity Sensor Bare Wire

The pH Electrode Sensor can be used to detect the pH value of water quality. It can be used in harsh environment and the monitoring data is stable and reliable.