This 2MP HDR Drain Camera System with Meter counter 2MP Sony Sensor Resolution:1920*1080px
and View angle:180°view angle

This 2MP HDR Drain Camera System with Meter counter 2MP Sony Sensor Resolution:1920*1080px
and View angle:180°view angle

This 5MP Drain Camera System with 200m 7.5mm Soft Cable 360PT waterproof camera
5MP Sony Sensor Resolution:2560*1440px and View angle:135° view angle

The acceleration output of SM1500 and SM550 sensors can be analog bipolar or differential, 4-20mA current loop output is also available for both sensors.

Access to high performances with the Digital Handheld Instrumentation.

A real combination of simplicity, flexible, reliability and reduced maintenance technologies, the ODEON Meters offer you a total confidence in your readings in laboratory and field conditions.

The Air Quality Monitoring Sensors are low-cost all-in-one monitoring sensors, which changes the layout of the traditional monitoring industry.

Accurate measurement can be achieved by modern optical and electrochemical technology. Effective information can be output 24 hours uninterruptedly, providing guidance for the further occurrence and spread of pollution.

The ammonia nitrogen sensor using RS485 communication interface and Modbus RTU standard protocol. It has built-in PT1000 temperature sensor and compensation algorithm. It can replace the ammonia nitrogen intelligent sensor with film head without reagent, secondary pollution and low maintenance cost.

The Ammonia Nitrogen Sensor detects a low concentration of ammonia nitrogen in water by measuring the change in absorbance at a given point in time.

It can be used in harsh environment and the monitoring data is stable and reliable.

Auxiliary Double Light is designed for supplemental lighting in large bores or bores with very dark walls.

The early warning bacteria system, for the detection of microbiological activity.

The measurements are realised in a short period of time, 1-2 hours, depending on the sampling volume and cleaning procedures.

The Blue Green Algae Sensors is an intelligent sensor with cleaning brush for chlorophyll/cyanobacteria sensor based on RS485 communication interface and Modbus RTU standard protocol.

It can measure cyanogreen algae, rhodamine and other factors.

Borehole Inspection Camera 400 Metres.
 

The Low Cost Borehole Inspection Camera 5m Telescopic Pole 1080P HD Waterproof Inspection System.

The Low Cost Borehole Inspection Camera Wrist-Wearing System.

Borehole Rotary Camera and Water Well Inspection Camera 0-2,000 metres.

The Low Cost Borehole Underwater Inspection Camera 8m Telescopic Pole System.

The C-100 is a three-component velocity equivalent output seismic sensor.

This inspection camera comes in either 8m or 10m with a two way talk back radio and also has imaging sensors.

With built in loud speaker microphone camera audio monitoring range 300 m sq.

Sony imaging sensor with starlight level sensitivity HD photos, video and playback.

Sampling can take place by time or flow (pulse or current) proportional or with a trigger contact to start/stop time based sampling.

Centrifuge Bench Top High Speed.

Centrifuge Economical Clinical Mini

Powerful centrifugal force 15100g, broad application range.

Centrifuge High Speed Refrigerated LED.

Centrifuge Centrifuge Low Speed Brushless DC Motor SCM Controlled.

Chemical Oxygen Demand (COD) is the total measurement of all chemicals (organics & in-organics) in the water and waste water.

The COD Sensor can be used to detect the Chemical Oxygen Demand value of water quality. It can be used in harsh environment and the monitoring data is stable and reliable.

The dissolved oxygen sensor for monitoring water quality. It can be used for on-line monitoring and for harsh environment in the field.

Chloride is found in both saltwater and freshwater. Almost all natural waters contain chloride.

This chloride sensors measures the levels in water ensuring it is safe for all animals, plants and humanity.

Clamp on Electric Flow Meter

Ultrasonic cleaning is based on the cavitation effect caused by high-frequency ultrasonic wave vibration signals in the fluid.

Microscopic bubbles are formed, and they implode violently causing cavitation which creates an intense scrubbing action on the surface of the item being cleaned.

The All-in-One weather sensors have a compact weather station.
 

The pH sensor consists of a measuring electrode, a reference electrode (Ag/AgCl), a Gel electrolyte (KCl), a temperature electrode, a smart signal processing module (SSP) and a housing.

Buoys suitable for housing data monitoring equipment can be fitted with access hatches, internal tubes, tying off cleats and battery housings.

The fishing camera is designed with one 30m underwater camera and 5-inch LCD DVR monitor set.

This deep well electronic water level dip meter has a high strength tape which reduces stretching.  Providing accurate readings over the lifetime of the meter.

A versatile deluxe  carbon fibre pole telescopic water sampling system with interchangeable sample containers and holders.

This deluxe carbon fibre pole telescopic liquid 4.8 m sampling system is ideal for sampling from wine barrels, streams, rivers and reservoirs where access would otherwise be difficult.

The Depth Encoder Cable Protection can be used on the Dip Meters and Borehole Cameras.

This microscope in the field of light microscopy, adapted specifically for routine laboratory brightfield applications.

These microscopes are suitable for routine microscopy and have an ergonomic design for comfortable long-term use.

The digital pH sensor with redox and temperature -measures: pH, redox, temperature

The portable digital point load tester is an instrument that can measure the tensile and compressive strength of rock easily and quickly.

The Digital Sensors DIGISENS (smart water control sensors) sensors can connect to any type of recorder, transmitter or controller with a Modbus RS485 input, making data transfer more reliable.

The DIGISENS sensors can connect to any type of recorder, transmitter or controller with a Modbus RS485
input, making data transfer more reliable.

The fixed Digital Transmitter Multiparameters Instrument – Intelligent transmitter for intelligent sensors: Dissolved oxygen / Turbidity / pH / T°C / ORP / Conductivity / Salinity / COD, TOC, BOD, SAC254.

Waste water treatment plant (aeration tank for control/regulation of Nitrification / Denitrification process, Drinking water (control raw water), Industrial waste water treatment (reject control, regulation), Survey of surface water, Fish farming and wine testing.

Special features are optional on the dip meters with a wine baler attachment.  The stainless steel baler is simply attached to the dip meter tape and a wine sample can be retrieved from the wine tank. At the nominated level without sampling the bottom of the wine tank.

TC water temperature and water quality measuring instrument is a dual-parameter measuring instrument for measuring instantaneous water temperature and water conductivity.

This Dip Meter Motorised With Submersible Probe

Well depth measurement for Pipes Wells /Boreholes Size: 30m, 50m, 100m, 150m, 200m, 250m, 300m, 400m, 500m

This sonic water level meter provides an accurate measurement for the measurement of water level in drilling holes or water level pipe.

This dip meter provides an accurate measurement for the measurement of water level in drilling holes or water level pipe ,particularly suitable for hydropower engineering underground water level or artificially inspection dam observation. With pulley assembly to prevent fraying of measuring Sensor tape which prolongs Dip Meter tape life.

The Disdrometer is a laser instrument that measures the drop size distribution falling hydrometeors. It
can also monitor rainfall types, visibility, radar reflectivity and other parameters. It is widely used in the field of hydrometeorology.

The dissolved oxygen sensor for monitoring water quality. It can be used for on-line monitoring and for harsh environment in the field.

Dissolved oxygen is a measure of water quality.  It can be used in industrial water treatment plants, aquaculture, fish transportation, aquariums etc.

The dissolved oxygen sensor for monitoring water quality. It can be used for on-line monitoring and for harsh environment in the field.

This drinking water measurement of turbidity measures and controls cooling water treatments and drinking water.

The dual channel atmospheric constant flow sampler It is used to collect air formaldehyde, ammonia, benzene and total volatile organic compound (TVOC) gas.

The Dual Borehole Camera is a great combination of modern technology at an affordable price. It is well suited for inspecting various reservoirs, wells, borehole, shafts, pipes, tanks and other objects from the top down.

This is a compact, ultra low-cost digital accelerograph. It integrates 3 axes MEMS accelerometer, 20bit digitizer, embedded linux OS and GPS or NTP timing.

The Eco sampler is a compact device that operates in even the harshest conditions, and manufactured in line with the highest quality standards.

A voltage is induced in a conductor moving through a magnetic field.

In the electromagnetic measuring principle, the following medium is the moving conductor.

The thermocouple (resistance) integrated temperature transmitter, a thermal resistance and a temperature transmitter module.

The E-series is more than fulfilling the rules for explosion proof design, it is about safety during the daily operation.

F series is an extensive selection of indicators, controllers and monitoring systems for liquid and gas applications as well as for level ,pressure and temperature measurement in industrial environments.

N410 Batch Controller.

The fluorescent dissolved oxygen sensor is designed for the continuous measurement of dissolved oxygen in water.

The fluoride sensor easily measures the extent of fluoride mainly in water.  It is used in Agriculture, Councils and government bodies testing drinking water to ensure the water is safe.

The free water control system for pH and Free Chlorine measurement.

The operation of the International Gas Turbine Meter is based on the measurement of the velocity of gas. The flowing gas is accelerated and conditioned by the meters straightening section.

The GB6211 seismometers combine the low-noise molecular-electronic sensing element (transducer) and the electrodynamic feedback which results in a very flat response over a wide frequency range, high dynamic range and greatly improved time and temperature stability of the instrument parameters.

Model UP201

The grease caddy is designed to help technicians know when to stop adding grease, which will assist with no downtime due to machine failure.

High quality Handheld Ultrasonic Flow Meter with Clamp On Ultrasonic Flow meter incorporates the latest ICs manufactured from the famous semiconductor.

Three dimensional vibrating screen filter has imported high quality stainless steel and general steel manufacturing, but also according to customer needs to use non-metal and other special manufacturing materials.

Inflatable packers are used around the world (universal), as underground test devices for liquid pressure measurements and major elements used where drilling and injection are done by injection of consolidating or waterproofing grouts, and have many applications related to construction sites.

The Inline Guillotine is an automatic fixed volume sampler for use on 100 % filled and pressurised effluent lines. The sampled process must be liquid and free of air/hard solids.

The iTOXcontrol is the most versatile screening and Early Warning System in the world with unique options:

• Integrated and automated cultivation of the bacteria inside of the instrument.
• Information can be sent to an internet database to support decision making for alarm monitoring and modelling.
• Integration of different optional sensors like a UV-VIS sensor or Algae sensor (for Chlorophyll-a and blue-green algae) which creates a combined system for Early Warning and Water Quality Monitoring.

Intelligent Swirl flow meter developed by our company is a new flow instrument at the leading level in China. This instrument has a combined function of flow capacity, temp and pressure measuring.

The isotherm portable sampler is used to store collected samples at controlled temperatures. 

The Pulley Assembly can be used for the Dip Meters or as a Borehole Camera accessory.

The leaf wetness sensor can accurately measure the humidity of the leaf surface, and can monitor the trace
water or ice crystals on the leaf surface.

Fluid entering the meter first passes through an inlet flow straightener that reduces its turbulent flow pattern. Fluid then passes through the turbine, causing the turbine to rotate at a speed proportional to fluid velocity.

Camera Dimension: 90° No LED, ø 20.5*60.5mm 0.0001Lux@F1.2 ensures clear image.

Under water Camera waterproof rate: IP68The camera can withstand 100m water pressure ( 1MPa) Cold-resistant, waterproof and pull-resistant black cable.7 inch TFT color monitor 1024*600 pixel.

This low power digitaliser Seismic Recorder resolution 6+1 analog seismic channels telemetry digitiser/recorder. 32bits ADC converters provide effective resolution better than 23.7bits@100sps. The size of the instrument is only 168x106x68mm.

The GEOthree series high resolution 3+1 analog seismic channels telemetry digitizer / recorder.

The test sieve is a tool for material particle size classification and particle size detection.It is used for testing, identification, analysis of the screen.

This Multi-parameter water quality monitoring 7 sensor can simultaneously detect: temperature, conductivity, pH, DO (dissolved oxygen), turbidity, ORP (Redox potential), ammonium ion, potassium ion, chlorophyll, blue-green algae, suspended solids and other water quality parameters.

A portable five-in-one sensor. It can monitor PH, dissolved oxygen, conductivity, turbidity and temperature at the same time. It can also select extra COD, chlorophyll and cyanobacteria items.

The multi-parameter water quality meter is a portable five-in-one sensor. It can monitor pH, dissolved
oxygen, conductivity, turbidity and temperature at the same time. It can also select extra COD, chlorophyll and
cyanobacteria items.

The Non-Invasive Road Sensor is designed to monitor traffic and road surface status, which uses remote sensing technology, to avoid damage to the road.

Our oenological UV-Visible spectrophotometric analysis, to optimise quality, ensure regularity, produce wines in style and predefined characteristics include rigorous quality control and a mastery of the different stages of development.

The iToxcontrol ALG control option online algae sensor.

The Online Analyser for Chlorine without reagent STAC CL is difficult today to measure chlorine whose concentrations fluctuate from 4 mg/L up to 3 g/L.

The problem still becomes complicated if measurement must be automated.

The optical dissolved oxygen sensor does not require calibration it features ultra-low power technology.

The overflow detector sensor detects the presence of water and delivers information in the form of non-polarised dry contact.

The overflow detector PONSEL has 2 waterproof and rugged enclosures: sensor and cylindrical control unit.

The overflow detector sensor detects the presence of water and delivers information in the form of non-polarised dry contact.

The Oxidation Reduction Potential ORP Electrode Sensor measures the ability of a lake/river etc to cleanse itself as it breaks down waste products, these include contaminants as such dead plants and animals.

The peristaltic sampler can take samples from open channels or wires and has a with DN 12 or DN 9 mm tubing.

The pH Electrode Sensor that can be used to detect the pH value of water quality. It can be used in harsh environment surface and ground water.

The pH Electrode Sensor can be used to detect the pH value of water quality. It can be used in harsh environment and the monitoring data is stable and reliable.

PHOTOPOD can be used by connecting to ODEON multiparameter, or by connecting directly to a computer.

The GEOThree recorder has 3 input channels, and integrated sensor electronics. The digitizer is based on a powerful, wide dynamic range 32bit delta-sigma analog-to-digital converter, with very low noise characteristics and excellent power supply rejection.

The extended selection of process fittings and materials allows use in extreme temperature and pressure ranges.

When accessibility is an issue, such as when a motor is contained within a closed cabinet, or a test point is in a hard-to-reach area, the Remote Access Sensor (RAS) is the answer.

The Remote Access Sensors Quickly and easily inspect enclosed or hard-to-reach bearings with UE Systems’ permanent mounted Remote Access Sensors.

Residual chlorine is the extent of chlorine that remains in the water at a certain point of time. Its main use if by water treatment plants.

The S-100 is a three-component velocity equivalent output seismic sensor.

The GB6211 seismometers combine the low-noise molecular-electronic sensing element (transducer) and the electrodynamic feedback.

The S-200 is a three-component velocity equivalent output seismic sensor.

The S-400 is a three-component velocity equivalent output seismic sensor.

The scientific balances are used for determining the weight or mass of a sample, scientific balances are among the more vital pieces of laboratory equipment.

Sieve mesh materials: stainless steel, brass and phosphor bronze.

Frame material: stainless steel and brass, larger diameter sieves also available in galvanized steel.

The Small diameter piezometer is used to measure fluid pressure, such as groundwater level, dam body, pore water pressure of soil.

The Pulley Assembly can be used for the Dip Meters or as a Borehole Camera accessory.

This small water level meter provides an accurate measurement for the measurement of water level in drilling holes or water level pipe.

The technique is based on advanced triggering and decision algorithms, running at the machine and at server’s side, respectively.

The soil sensor which can measure soil moisture & EC & temperature, provided with high accurate and
high sensitive. It is an important tool to observe and study the occurrence, evolution, improvement and the
dynamics water of saline soil.

The Spectralab, they can be easily controlled by a computer, but also by a tablet using Bluetooth® technology.

The Spectral Absorption Coefficient (SAC) at 254 nm helps determine the organic content of a water sample
also the COD, TOC and BOD parameters by applying the appropriate correlation coefficients.

Standpipe piezometers measures the water pressure in soil and rock, it is used to monitor water levels in vertical boreholes.

This steel frame water level meter provides an accurate measurement for the measurement of water level in drilling holes or water level pipe.

The Submersible Borehole Level Sensor is designed for ground water and drilling fluid level measurements. Based on the fluids design, it can ensure the stability of the measurement.

The Submersible Ceramic Level Sensor is a liquid level measuring instrument with high stability and precision. It adopts fully sealed 316SS stainless steel body and ceramic core body, high explosion-proof and easy to clean.

The Submersible Digital Level Sensor is designed with tapered and fully sealed IP68 waterproof design, so it is suitable for all kinds of harsh environment measurement.

The Submersible Water Level Sensor is suitable for any water level measurement. It adopts 316SS all-welded stainless steel body design, which can resist the impact and erosion of any medium.

The MS-602 pyranometer is the smallest true thermopile pyranometer. It is the most economic measurement solution for global solar radiation measurements capturing the full solar spectrum.

This is a compact miniature digital seismometer which integrates three seismic and three acceleration channels. It supports high resolution 24bit digitizer, embedded linux OS and GPS or NTP timing.

The tipping rain gauge conforming to WMO is a standard instrument for monitoring rainfall data in various
industries. It can be used for traceability analysis of various applications.

A portable and easy to use system for toxicity measurements in a wide variety of samples and applications. It
automatically measures the luminescent effect of the Vibrio fisheri and will give an indication when the tested sample is toxic.

The S200 Digital Turbidity transmitter.

Turbidity sensors measure the extent of light throughout suspended solids in water. The extent of the light in water increases the waters turbidity levels.

The TS7 Sensor consists of a light source and a light detector (photo detector).

The measuring of air quality identifies pollutant levels by measuring the quantity of certain pollutants in the external outdoor air.

Australia has its own Australia Air Quality Index (AQI) system. The AQI of simple design allowing an easier may for pollution levels to be monitored and shared with the general public so they understand and can view the health risks.

The Ultra Trak 750 provides early warning of:

• Mechanical Failure;
• Valve Leakage;
• Flow Disruption; &
• Internal Arcing/Partial Discharge.

Manage your lubrication program with the Ultraprobe 401 Digital Grease Caddy Pro and reduce bearing failure.

This is a compact, easy-to-use system for measuring the velocity and depth of water in rivers and streams, open drainage channels, and large pipes.

Ultrasonic Flow Meter – Hand held, Portable and Wall Mounted

This instrument determines the height from the bottom to the surface of the liquid by measuring the air propagation time.

The Pastel UV is able to measure 5 parameters simultaneously and thus permits rapid characterisation of the effluent.

Vacuum Samplers are equipped with reliable basic hardware and standard electronics.

The Variable Area Flow meter is an instrument for measuring the flow of liquids or gases in pipelines. It includes a vertical tube through which the fluid flows whose diameter increases from the bottom to the top and a float which can move vertically in the tube.

This high definition vehicle inspection camera allows you to check the vehicle underneath, above and to the side making it effortless easy and seamless.

Vibrating Wire Piezometer

The visibility sensor will allow you to see through the fog so you can see the road.  This sensor is used at airports and freeways.

The vortex flow meter is used for measuring the flow velocity of gases or liquids in pipelines flowing full.

The measuring principle is based on the development of a Karman vortex shedding street in the wake of a body built into the pipeline.

 PHEHT digital pH, ORP and temperature Sensor Bare Wire

NTU Turbidity Sensor Bare wire

OPTOD digital Optical Dissolved Oxygen Sensor Bare Wire

Conductivity and Salinity Sensor Bare Wire

The pH Electrode Sensor can be used to detect the pH value of water quality. It can be used in harsh environment and the monitoring data is stable and reliable.

Water Well Piezometer.

The 6 section telescopic rod can meet the needs of different heights up to 10 m.

The sodar wind profiler is a low-cost aerial wind measurement product. It can measure wind speed and wind direction values at 20 levels with an average height of 200m, and has done rigorous comparison tests.

Woven wire mesh sieves can be supplied with aperture sizes ranging from 125 mm down to 20 microns in full and half height versions.