This is an on-line water quality controller that serves as a central hub for connecting multiple probes and process control. Designed for precision, it provides real-time multi-parameter monitoring.

This

4MP HDR Drain Camera System Self level head with Sonde, Meter counter camera:

• • 4MP Sony Sensor Resolution:2560*1944px
  • 32mm diameter camera with 2 skids, 40mm and 90mm
  • Self level head with 512hz Sonde
  • Cable material: Glass fibre, Max 100M Diameter: 11mm with 10 inch Monitor
  • 10.1 inch touch screen resolution:1280*800pix,IP66

This 2MP HDR Drain Camera System with Meter counter 2MP Sony Sensor Resolution:1920*1080px
and View angle:180°view angle

This 2MP HDR Drain Camera System with Meter counter 2MP Sony Sensor Resolution:1920*1080px
and View angle:180°view angle

This 5MP Drain Camera System with 200m 7.5mm Soft Cable 360PT waterproof camera
5MP Sony Sensor Resolution:2560*1440px and View angle:135° view angle

The dual channel atmospheric constant flow sampler It is used to collect air formaldehyde, ammonia, benzene and total volatile organic compound (TVOC) gas.

This high definition vehicle inspection camera allows you to check the vehicle underneath, above and to the side making it effortless easy and seamless.

This Multi-parameter water quality monitoring 7 sensor can simultaneously detect: temperature, conductivity, pH, DO (dissolved oxygen), turbidity, ORP (Redox potential), ammonium ion, potassium ion, chlorophyll, blue-green algae, suspended solids and other water quality parameters.

The 6 section telescopic rod can meet the needs of different heights up to 10 m.

The Blue Green Algae Sensors is an intelligent sensor with cleaning brush for chlorophyll/cyanobacteria sensor based on RS485 communication interface and Modbus RTU standard protocol.

It can measure cyanogreen algae, rhodamine and other factors.

Residual chlorine is the extent of chlorine that remains in the water at a certain point of time. Its main use if by water treatment plants.

Chloride is found in both saltwater and freshwater. Almost all natural waters contain chloride.

This chloride sensors measures the levels in water ensuring it is safe for all animals, plants and humanity.

The fluoride sensor easily measures the extent of fluoride mainly in water.  It is used in Agriculture, Councils and government bodies testing drinking water to ensure the water is safe.

The Ammonia Nitrogen Sensor detects a low concentration of ammonia nitrogen in water by measuring the change in absorbance at a given point in time.

It can be used in harsh environment and the monitoring data is stable and reliable.

Chemical Oxygen Demand (COD) is the total measurement of all chemicals (organics & in-organics) in the water and waste water.

The COD Sensor can be used to detect the Chemical Oxygen Demand value of water quality. It can be used in harsh environment and the monitoring data is stable and reliable.

The Non-Invasive Road Sensor is designed to monitor traffic and road surface status, which uses remote sensing technology, to avoid damage to the road.

This Dip Meter Motorised With Submersible Probe

Well depth measurement for Pipes Wells /Boreholes Size: 30m, 50m, 100m, 150m, 200m, 250m, 300m, 400m, 500m

The Pulley Assembly can be used for the Dip Meters or as a Borehole Camera accessory.

TC water temperature and water quality measuring instrument is a dual-parameter measuring instrument for measuring instantaneous water temperature and water conductivity.

The ammonia nitrogen sensor using RS485 communication interface and Modbus RTU standard protocol. It has built-in PT1000 temperature sensor and compensation algorithm. It can replace the ammonia nitrogen intelligent sensor with film head without reagent, secondary pollution and low maintenance cost.

The Low Cost Borehole Underwater Inspection Camera 8m Telescopic Pole System.

The Submersible Ceramic Level Sensor is a liquid level measuring instrument with high stability and precision. It adopts fully sealed 316SS stainless steel body and ceramic core body, high explosion-proof and easy to clean.

The Submersible Digital Level Sensor is designed with tapered and fully sealed IP68 waterproof design, so it is suitable for all kinds of harsh environment measurement.

The fishing camera is designed with one 30m underwater camera and 5-inch LCD DVR monitor set.

A portable and easy to use system for toxicity measurements in a wide variety of samples and applications. It
automatically measures the luminescent effect of the Vibrio fisheri and will give an indication when the tested sample is toxic.

The Pastel UV is able to measure 5 parameters simultaneously and thus permits rapid characterisation of the effluent.

The TS7 Sensor consists of a light source and a light detector (photo detector).

Vacuum Samplers are equipped with reliable basic hardware and standard electronics.

Our snow level has a opto-electronic laser sensor for determining snow depths.

The turbidity sensor Nephelometric is used for drinking and very pure waters.

The water sampler for industrial application is a cost effective sampling solutions for industrial applications.

The self cleaning waste water sampler installation can be equipped with a Unitronics Jazz or a Unitronics Vision 130 controller.

IES NIR51 Non-Intrusive Pavement Sensor is designed to monitor traffic and road surface design, which uses remote sensing technology, to avoid damage to the road.